|3.1.2019||Posted by yanghm under Advertising & Marketing|
115*1*22 cutting disc always have some problems when they are used, and these problems always make people feel confused. In order to avoid this situation, we must understand the problems and solutions that will occur before use. The common problems of 115*1*22 cutting disc are as follows:
First, the saw blade is broken or broken:
(1) adjusting the standard speed of the material to be cut;
(2) Adjust the feed rate of the lower knife not too fast;
(3) Re-grinding the cutting piece or note that the cutting method is required to make a special fixture to avoid material shaking;
(4) Different materials need to be cut to different materials, and the number of teeth should be different.
Second, there are different sounds during sawing: (1) stop cleaning, check whether the number of cutting teeth is suitable; (2) re-grind the cutting piece; (3) check the workpiece clamping device.
Third, the sawing workpiece is not vertical and the length is inconsistent: (1) select the good material and standard materials, and often check the condition of the rack and the positioning ruler to correct the level of the machine; (2) choose according to different materials. The speed of the lower knife is selected according to the wall thickness of the material; (3) because the cutting piece has a hammer degree, it is erected to avoid gravity pressure.