|26.12.2018||Posted by juniperqq under Business Products & Services|
If you are looking for a grinding disc with high quality grinding disc factory price, don’t miss our cheap metal grinding disc. First, let’s talk about the grinding disc cooling method.
- The cheap metal grinding disc grinding fluid is not properly selected, and a reasonable grinding disc grinding fluid is selected. Generally, the oil grinding disc grinding fluid is selected to reduce the temperature of the cheap metal grinding disc grinding zone, which will appropriately reduce the occurrence of burns. Grinding disc grinding fluid selected under conditions.
- Dry grinding must not be used in the case of wet grinding.
- The cheap metal grinding disc grinding fluid is effectively and fully supplied, not only the grinding disc grinding zone is sufficient, but also the pressure is large; the temperature can be lowered and the chipping can be fully performed.
- Keep the coolant clean.
- Keep the coolant at a lower temperature, so that the temperature in the grinding zone of the grinding disc can be lowered and a radiator can be used if necessary.
- The position of the cheap metal grinding disc of the grinding disc is not proper. The nozzle should be as close as possible to the grinding zone of the grinding disc.
- Install an air baffle on the coolant nozzle.
- Use internal cooling grinding disc: The internal cooling method is to introduce the strictly filtered cooling liquid into the hollow cavity of the cheap metal grinding disc through the hollow main shaft. Due to the centrifugal force, the cutting fluid is pumped around the pores of the grinding disc to directly cool the grinding zone of the cheap metal grinding disc.