Úvodní stránka » Advertising & Marketing » Solutions To Machining Problems Of Cnc Die Sinking EDM (1)

Solutions To Machining Problems Of Cnc Die Sinking EDM (1)


CNC Die Sinking EDM Machine, also known as CNC EDM die sinking and CNC Spark Erosion Machine provided by one of the professional CNC EDM machine suppliers, DMNC, is a kind EDM machine that utilizes high-frequency power between positive and negative anodes (electrode and workpiece), 3-axis or more axes controlled, to break through the gap between electrode and workpiece, to create high temperature to melt and remove metal to get needed profile cavity. It’s like a projective copy of the profile of the electrode on the workpiece. We also supply cnc edm spark erosion machine, edm spark erosion machine, cnc edm drill machine, cnc edm wire cut machine, cnc sparking machine, die sink edm machine, znc edm machine,etc.


  1. Low processing efficiency of the EDM machine


(1) The initial electrical discharge machining efficiency is low-the electrode size scaling (spark gap) must be large, and the automatic programming can select the condition number of a larger current. The cavity should be pre-milled as much as possible.


(2) The last few segments of the program have low discharging efficiency-use the fixed time discharging function to effectively control the time of finish machining (the discharging time needs to be preset).


(3) The machining area that input when created the machining program is too small-the CNC EDM control system uses the area as the reference for discharging programming. Even if the electrode size is scaled up, the area is too small, and it will not create large discharge conditions. In such kind cases, you can increase the machining area value manually.


(4) The application type is not the correct-for example, the “standard” application type of small area machining is selected for the actual machining of a large cavity. Among all application types, “micro-machining” has the lowest efficiency.


(5) Machining priority-Selecting low-wear priority means low efficiency while selecting high-efficiency priority means faster speed and bigger wear of electrode.


(6) Unreasonable combination of discharging and electrode lifting-according to the discharging status, adjust the height of electrode lifting to match discharge time properly.


(7) Optimize the parameters – reduce the pulse interval, increase the servo reference.




  • Improved the machining technology-the use of graphite electrodes greatly improves overall production efficiency.


  1. Big electrode wear

(1) Improper use of discharging parameters-the processing parameters with the priority of low wear should be used. Small electrodes can be selected for micro-machining application types.


(2) The discharging power is too big. For small and sharp electrodes, big current machining cannot be used.


(3) The discharging power is too small, and the machining efficiency is low, which cause that the discharging time is too long and wear of the electrode. If the electrode wear is too big and the machining speed is too slow, please adjust the parameters to increase the machining efficiency.


(4) The electrode material is not good-use high-purity copper or copper-tungsten alloy with lower wear as the electrode material.


  • The pulse width is too small-increase the pulse width to decrease the electrode wear.



Napsat komentář

Vaše e-mailová adresa nebude zveřejněna. Vyžadované informace jsou označeny *


devět × 3 =