Úvodní stránka » Advertising & Marketing » FLOODED LEAD ACID BATTERY

FLOODED LEAD ACID BATTERY

Types of Flooded Lead Acid Batteries

 

There are many types of flooded lead-acid batteries, which are used in photovoltaic energy storage systems. There are three types that are mostly used: flooded lead-acid batteries, valve-regulated lead-acid sealed batteries, and lead-carbon batteries.

 

Flooded type Lead-acid Battery

The sulfuric acid in the electrolyte of flooded type lead acid battery directly participates in the battery charging and discharging reaction process. In traditional lead-acid batteries, the remaining space in the battery jar, except for the polar plates, separators and other solid assembly parts is completely filled with sulfuric acid electrolyte, which is deep cycle flooded wet lead acid battery, in which the electrolyte is in a state of excess, so it is called a “flooded” battery with the battery polar plates completely immersed in the sulfuric acid electrolyte. There is a cover on the top of the flooded type lead acid battery that can ventilate and prevent the liquid from splashing. During use, due to the evaporation and decomposition loss of water, the cover needs to be opened regularly to add distilled water and adjust the electrolyte density, so it is customarily called “open type” battery. The flooded type lead acid battery has the characteristics of high power conversion efficiency, long cycle life, high terminal voltage, strong safety, high cost performance, simple installation and maintenance, etc. It is currently the preferred chemical power supply in various energy storage, emergency system battery, and start-up devices.

 

Valve-regulated Lead-acid Sealed Batteries(VRLA batteries)

They are also known as maintenance-free batteries, which can be divided into two types: AGM lead-acid batteries and gel-sealed lead-acid batteries. The AGM battery uses pure sulfuric acid aqueous solution as the electrolyte, most of which is in the glass fiber membrane, and a part of the electrolyte is absorbed inside the polar plate. AGM sealed lead batteries have less electrolyte, thicker polar plates, and lower active material utilization than open-ended batteries, so the discharge capacity of the battery is about 10% lower than that of open-ended batteries. Compared with today’s gel-sealed batteries, AGM sealed lead batteries have a smaller discharge capacity. Gel-sealed lead storage battery (ie GEL type battery) and gel lead-acid battery are improvements of the ordinary lead-acid battery with liquid electrolyte. It replaces the sulfuric acid electrolyte with the gel electrolyte, which improves the safety, storage capacity, discharge performance and service life when compared with ordinary batteries. Its electrolyte is made of silica sol and sulfuric acid. The concentration of the sulfuric acid solution is lower than that of absorbent glass mat battery, and the amount of electrolyte is more than that of absorbent glass mat battery, which is equivalent to flooded batteries. This electrolyte exists in a gel state and is filled in the separator and between the positive and negative electrodes. The sulfuric acid electrolyte is surrounded by gel and will not flow out of the battery.

 

Lead-carbon Batteries

It is a capacitive lead-acid battery, which is a technology evolved from the traditional lead-acid battery. It adds activated carbon to the negative electrode of the lead-acid battery, which is a flooded lead acid battery for solar power, and it can significantly improve the lifetime of lead-acid batteries. Lead-carbon batteries are the most advanced technology in the field of flooded lead-acid batteries, and they are also the development focus of the international energy storage industry for new energy, and have very broad application prospects.They are widely used in energy storage fields such as photovoltaic power station energy storage, wind power energy storage and grid peak shaving.

 

Different Voltages of The Flooded Lead-acid Batteries

When the flooded lead-acid battery is discharged, the metal lead is the negative electrode, which occurs the oxidation reaction and produces lead sulfate; the lead dioxide is the positive electrode, and the reduction reaction occurs to produce lead sulfate. When the battery is charged with direct current, elemental lead and lead dioxide are generated at the two poles respectively. After removing the power source, it returns to the state before discharge to form a chemical battery. Lead batteries can be charged and discharged repeatedly, whose single voltage is 2V. The battery is a battery pack composed of one or more cells, referred to as storage battery. The most common ones are 6v flooded lead-acid batteries, 8v flooded lead-acid batteries, and 12v flooded lead-acid battery, and there are other 2V, 4V, 24V batteries.

 

The actual voltage of the storage battery is not a constant value. The voltage is high when there is no load, while the voltage will decrease when there is a load. When a sudden large current discharges, the voltage will suddenly drop. There is an approximately linear relationship between the battery voltage and the remaining power. This simple association exists only when there is no load. When a load is applied, the battery voltage will be distorted due to the voltage drop caused by the battery’s internal impedance. According to the battery voltage and the reference value of the remaining power of the battery, it is assumed that the voltage when the battery is fully charged is 12.8V. It can be known that the battery with a rated power of 12V, when the voltage is 12V, the remaining power is about 50%; when the voltage is below 12V, the remaining power will drop rapidly.

 

The battery is bidirectional and has two states, flooded lead acid battery charging and discharging, and the current is limited. Different batteries have different maximum charge and discharge currents.

 

The charging and discharging current of the battery are related to the system. If it is not designed well, it will affect the performance of the system. Shallow cycle discharge helps to extend flooded lead acid battery life. The shallow cycle operation of the battery has two obvious advantages: first, the battery generally has a longer cycle life; second, the battery often retains more spare ampere-hour capacity, so that the power supply guarantee rate of the photovoltaic system is higher. According to actual operating experience, the moderate depth of discharge is 60% to 70%.

 

KIJO is a leading flooded lead acid battery supplier/manufacturer/company in China, please contact us!

 

Founded in 1993, KIJO battery Group is a professional storage battery manufacturers and vrla battery suppliers. We provide Energy Storage Battery, Reserve Power Battery, Motive Power Battery, power storage battery, 2 volt flooded lead acid battery, 6v flooded lead acid batteries, 8v flooded lead acid batteries and etc. Want to know about industrial lead acid battery market? Please contact us.

Štítky: ,

Napsat komentář

Vaše e-mailová adresa nebude zveřejněna. Vyžadované informace jsou označeny *

*


pět − = 4