|16.6.2020||Posted by satafluxes under Advertising & Marketing|
General Description of Ti Tablet
Titanium tablet is used to adjust the content of Ti content in Aluminium Alloy, it is made by metal powder and the rest are pure aluminium or flux in proportion.
High efficiency is above 90%, the flux in the metal additives is favor for refining, purification, has effect of degassing, drossing and no content to make pollution.
Suitable for non-ferrous metal plates, strips, foils, profiles, rods, cables and alloys for the preparation of colored grades.
Content: metal powder+ rest
Rest: A-Sodium free flux, B- flux+aluminium
Usage Instruction of Ti Tablet
Before refining flux application, the metal additives can be put into melting furnace or holding furnace directly. To achieve the high efficiency, should match up the right notice as follows:
The temperature of the aluminium liquid not lower than 740℃ the best application temperature is 750+5℃
It is sink down by itself, so keep the surface clean is very important. to avoid wrapped by the floating slag or the slage which floated on the surface. So it must be put into after drossing.
After skimming the dross, the tablet should be put directly in to the aluminium molten evenly with tablet please do not crush it, keep it stay for 20-30mintures, stir it and let it stay for 7-15 minutes. Sample analysis should be performed.
Dosage of Ti Tablet
Dosage=(Target-initial)*aluminium wt% /(90% * the alloy element content in the metal additives)
Target: element content of target
Initial: Original content of elements in the melt
Wt: The weights of aluminium melt
Advantage of Ti Tablet
It can be put into the normal temperature aluminium metal
High density, easy to sink down
reaction quickly, no oxidation and burn loss
Package of Ti Tablet
500g/tablet.4 tablets wrapped by foil package load in 20kg carton.