Úvodní stránka » Advertising & Marketing » Introduction of Pneumatic Punch Press Feeder

Introduction of Pneumatic Punch Press Feeder

 

 

Description: Pneumatic punch press feeder is an earlier machine used for punch feeding. It has two forms: active feeding and passive pulling. Active feeding is suitable for general materials. Materials are fed into the die by feeder; passive pulling is suitable for thin or soft materials, mainly used for feeding products with low precision and low speed.

 

Performance characteristics:

  1. Pneumatic punch press feeder is an earlier machine used for punch feeding. Its main characteristics are: simple operation, convenient installation and affordable price. It is mainly used in the delivery of products with low precision and low speed.

2.This machine has two forms: active feeding and passive pulling. Active feeding is suitable for general materials, and materials are fed into the die by feeder; passive pulling is suitable for thin or soft materials. The feeder is installed in the direction of the outlet of the die, and material is pulled out by pneumatic punch press feeder to avoid material bending.

  1. Standard fittings have three combination sets (water filter, air filter, pressure regulation), one high-pressure pipe (connecting air source and air feeder air path, transmitting power source to feeder), one L-type installation plate (used to install air feeder on punch), one set of guide rod, one set of sealing ring and one buffer (AF-5C starting equipment), which can make rapid feeding achieve lower vibration effect).
  2. Standard pneumatic punch press feeder adopts the method of floating rod feeding, through the guide rod mounted on the slider, to complete the feeding action, and the machine itself does not have relaxation function. If the upstream and downstream journey of the press is too short or too long, the E-type feeding solenoid valve should be installed to replace the floating rod to complete the feeding; while the R-type relaxing solenoid valve is suitable for the case of high precision feeding, using the solenoid valve to relax the fixed splint to correct the error, the actual selection should be based on your specific needs.

 

Napsat komentář

Vaše emailová adresa nebude zveřejněna. Vyžadované informace jsou označeny *

*


6 × = osmnáct