What factors need to be considered in the Wholesale Peanut Thresher with Dust Removal Sheller?
|25.3.2019||Posted by yanghuim under Advertising & Marketing|
There are many internal factors to consider before purchasing a peanut thresher and a duster. So, what factors do we need to consider when purchasing the device? Below the Wholesale Peanut Thresher with Dust Removal Sheller manufacturers to come to analyze, I hope to help you.
Feeding table: Feeding the belt on both sides, the retaining belt should be slightly compressed, too loose will cause downward leakage or grass stalks, too tight will cause the feeding belt to wear too fast. And the entire belt and the feeding belt should be pressed evenly and evenly, and there should be no gaps wide or narrow.
When rotating, the main and driven rollers and the outer circle must not have obvious jumps. Feed the belt interface, if it is spliced, it should be stacked. After a few turns, the feed belt must not be deflected.
Dry picking part: When rotating, the two ends of the wheel have no left and right yaw, no radial runout. The knife seat is straight and the upper knife has the same height and no looseness.
If necessary, you can remove the V-belts and chains that are connected to other parts, and rotate the drum several times at any force. If there is a fixed stop position, the drum is not balanced or not done. When used, the drum will vibrate and will not work properly.
Cleaning mechanism: It consists of the main fan, the cleaned surface belt and the vibrating screen. Whether the peanuts produced are clean or not is mainly determined by it.
The above is what the peanut thresher and dusting and peeling machine manufacturers share for you, I hope to help you.