The fast cheap metal grinding disc needs in use
|21.11.2018||Posted by juniperqq under Advertising & Marketing|
The sharpness of the fast cheap metal grinding disc is the most important type of grinding tool in the grinding process. The appearance of the grinding disc has certain advantages, but the grinding disc has occurred in the event of injury, so the safety performance of the grinding disc has also received extensive attention. Henan abrasive grinding tools The manufacturer reminds you to pay attention to the following problems when using the fast cheap metal grinding disc.
- Please check carefully before installing the cutting disc to confirm whether the cutting disc has deformation, crack, and collapse.
- When the flange is too small or the precision is poor, it is easy to damage the fast cheap metal grinding disc, please use it after improvement.
- When the fast cheap metal grinding disc is marked with the direction of rotation, it must be consistent with the direction of rotation of the machine tool. On the contrary, the cutting is not sharp, it is difficult to play the performance of the cutting disc.
- If the fast cheap metal grinding disc that does not match the cut workpiece is used, it is prone to abnormal wear, poor sharpness, abnormal heat, etc.
- If an abnormality is found during the cutting process, stop immediately.
- In the fast cheap metal grinding disc rotation, it is strictly forbidden to cut by hand, and it is not allowed to touch the grinding disc by hand or body.
- The cutting disc is strictly prohibited for operations other than grooving or cutting, to avoid abnormalities due to uneven force.
- When the cutting is not sharp, the fast cheap metal grinding disc should be trimmed and edged. If it continues to be used, it will overheat and overload and the grinding disc will be damaged.
The safety of the grinding disc must be taken seriously to ensure the safety of the workers. The above is the precautions about the use of the fast cheap metal grinding disc summarized by the Henan abrasives manufacturer. I hope that everyone will pay attention to avoid unnecessary problems when operating the grinder.
Štítky: fast cheap metal grinding disc