Resin cutting sheet cleaning method and installation cleaning method
|15.11.2018||Posted by xzbbvfvbh under Advertising & Marketing|
5 inch resin cutting disc for metal
In the production process, a diamond cutting piece is used to polish the belt. Generally, the aluminum flat cutting disc is removed for 5-7 days to be cleaned. (The above-mentioned rubber crumbs are polished and adhered to the surface of the corundum after high-temperature friction, which is difficult to clean)
Now we soak it in acetone for 2 hours, then clean it with an imported cleaning agent, which works well, but it is not environmentally friendly.
1, to be environmentally friendly, does not contain ketones, cannot be halogenated hydrocarbons.
2, can not damage the diamond cutting piece
The cut piece must be carefully inspected and identified before installation. The steps to check the authentication are:
1. Check if the grade of the cutting piece is correct and conform to the performance, shape, and size of all selected cutting pieces.
2. Check and identify the appearance of the cutting piece. Use your eyes to see if the appearance of the 5 inch resin cutting disc for metal is damaged (or cracked). Cut pieces that are damaged in appearance (or have cracks) cannot be used. In addition, it is required that the ends of the cutting piece are flat and there must be no obvious skew.
3. Inspect and identify the internal cracks in the cut piece. By hand-carrying the cutting piece, tapping the cutting piece with a wooden hammer to hear the sound, the cracked piece produces a crisp sound, and the cracked piece is hoarse, which cannot be used.